AquaSPArkle Pure Spa Salt

Description

AquaSPArkle Pure Spa Salt – 5 kg

Key Features/Characteristics

• Use to generate free chlorine
• Contains no anti-caking agents
• 50ml measuring scoop included

AquaSPArkle Pure Spa Salt is graded to be suitable for use with spa salt water sanitising systems. Adding Pure Spa Salt to your hot tub enables the sanitising system to generate free chlorine which disinfects your hot tub water, keeping it safe and bacteria free. AquaSPArkle Pure Spa Salt contains no anti-caking agents that could otherwise affect the sanitising cell.

Application Instructions

1. Balance the spa water in accordance with the guidelines in your spa owner’s manual.
2. Whilst the circulation system and jets are running, slowly apply the required amount of AquaSPArkle Pure Spa Salt into the filter compartment, one scoop (approx. 75g) at a time, until the correct amount has been added.
3. Allow the jets to run for an additional 5 minutes to ensure the salt is fully dissolved.
4. Periodically a top-up dose may be required to ensure the salt level is maintained.

Dose Rates
Water Volumes Dose rate to achieve salt level of:
Litres/Gallons                          1500mg/l           2000mg/l            2500mg/l
750/165                                         1125g                  1500g                     1875g
1,000/220                                    1500g                 2000g                    2500g
1,250/275                                      1875g                 2500g                     3125g

Note: Moisture may cause product to become lumpy, so always replace the lid securely after use and store in a cool, dry place.