Blue Horizons Rapid Shock – A powerful, fast dissolving oxidiser
Price range: £31.46 through £70.65
A powerful, fast dissolving oxidiser
High chlorine content – economical
Destroys swimmer wastes and helps prevent/kill algae
Stabiliser-free
Description
Blue Horizons Rapid Shock
- Helps prevent/remove algae and destroys swimmer wastes.
- Rapid dissolving
- pH 11.5
- Part of the BOAST System
Application Instructions
- Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust.
- Maintain free chlorine residuals routinely in the 1 – 3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment.
- If the water temperature is 20oC or higher and water depth at least 4ft deep, this product can be carefully broadcast directly over the pool surface. Always check the wind direction before broadcasting. Alternatively, pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump (s) are turned ‘on’ preferably near the water inlets to aid distribution.
- Repeat dose/application if necessary to achieve the desired level.
- After using this product pool water may become temporarily cloudy, so keep the filtration pump running until it clear.
- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences.
Dosing Rates
Water Volumes To increase Chlorine Level
Litres/Gallons 1mg/l 5mg/l 10mg/l
4,545/1,000 7g 32g 65g
11,360/2,500 17g 81g 163g
22,725/5,000 33g 163g 325g
68,175/15,000 99g 489g 975g
Additional information
| Weight | N/A |
|---|---|
| Pack Size | 2kg, 5kg |
