Blue Horizons Algae Controller – Efficient Algae & Biofilm Controller

Description

Keep Your Pool Crystal Clear with Blue Horizons Algae Controller

The Blue Horizons Algae Controller is used to prevent the growth of Algae. Dose weekly to prevent the build-up of many forms of algae inhabiting your pool.

Weekly dosing is necessary because this non-copper-based algaecide has a relatively short lifespan, requiring regular application.

When used as directed, Algae Controller will prevent a broad spectrum of algae inhabiting your pool.

Here at Watercare Solutions, we provide a variety of Algaecide Products, check them out!

Purpose:

• Used to prevent algae growth
• Copper-free algaecide
• Dose weekly to prevent the build-up of many forms of algae

Instructions

• Maintain pH level within the ideal range of 7.2–7.6. If not in this range, adjust.
• If algae are visible, brush thoroughly with a pool brush.
• Check the chlorine level and ensure it is established within the ideal range of 1 – 3mg/l (ppm). If algae kill dose is required, shock dose the pool to a minimum chlorine level of 5mg/l (ppm).
• Gradually pour Blue Horizons Algae Controller the solution into the pool, whilst the pump(s) are turned ‘on’ preferably near the water inlets to aid distribution.
• After the initial dose, this product should be applied once a week to prevent algae formation.

Dosing: Pool capacity – Algae Controller Dose Rates

• 1,000 gallons/4,545 litres –  initial dose rate, 50ml – weekly dose rate, 25ml
• 2,500 gallons/11,364 litres – initial dose rate, 125ml – weekly dose rate, 63ml
• 5,000 gallons/22,727 litres – initial dose rate, 250ml – weekly dose rate, 125ml
• 10,000 gallons/45,455 litres – initial dose rate, 500ml – weekly dose rate, 250ml

Note: We supply this product in 0.5l, 1l and 2l

For more information, head over to CPC Chemicals Algae Control Product PDF.