AquaSPArkle Spa pH Plus – Alkalinity Boosting Formula

Description

AquaSPArkle Spa pH Plus

The ideal spa pH level is between 7.2 – 7.6, promoting bather comfort, optimal chemical efficiency and protection of spa equipment. AquaSPArkle Spa pH Plus is a granular alkali used for raising the pH if it falls below 7.2

When pH is low (below 7.2)  Problems: Corrosive water, Disinfection gets used up quickly  Solution: pH Plus

When pH is high (above 7.6) Problems: Scale forming, Cloudy water, Disinfectant is less effective Solution: pH Minus

Key Features/Characteristics

• Powder for increasing pH
• Ideal pH Range: 7.2 – 7.6
• Test the pH of your spa water and if it is below 7.2, use AquaSPArkle pH Plus to raise it.

Application Instructions

1. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the spa whilst
   the pump(s) are turned “on”.
2. After a minimum of 30 minutes, recheck the pH level and if necessary repeat the treatment until the ideal pH is established.

Dose rates
Litres Gallons                  Dose rate
1,000 220                                 11g
1,500 330                                 17g

Please note: a number of treatments may be required.